Bülk Models Velomobiles
Bulk Front Suspension
Here you can find technical support information for Bülk “Front suspension” parts. On this page you can see descriptions, exploded views, videos & more. If you have questions do not hesitate to contact us, we would like to help you.
Designed for efficiency
The Bülk Distance is here!
Experience uncompromising aerodynamics meets everyday practicality. The fastest Bülk ever created features next-level CFD-optimized design, revolutionary “drag and grab” access technology, and the proven Bülk performance you trust.
Videos
In this section we will add videos that can help you fixing various malfunctions for “Front suspension” zone, maintenance videos or other kind of info that can make your velomobile experience great.
Removing Front Wheel And Suspension
Front Suspension Maintenance
Front Suspension Maintenance Guide
Regular suspension maintenance ensures optimal performance and handling. The maintenance process focuses on several key areas of the suspension assembly.
Suspension Component Removal The front suspension removal process requires careful attention to prevent damage to components. Key removal points include: The suspension assembly is secured by two contra nuts at the top. Remove these using a 13mm wrench while ensuring components don’t fall into the velomobile body. When removing the speed sensor, carefully detach the tie wraps and protect the sensor cable. For easier wheel removal, consider releasing some tire pressure to provide more clearance.
Spring System Maintenance The spring system requires periodic inspection, particularly after extended use. Remove the dust cap assembly, including the rubber seal and metal washer. Inspect the springs for wear or damage, especially after 30,000-50,000 kilometers of use. The spring divider must be properly oriented during reassembly to ensure equal suspension length on both sides.
Alignment and Assembly Proper alignment during reassembly is crucial for optimal performance. The suspension components must be able to turn freely without axial play. When installing the dust cap, ensure the metal washer is oriented with the rounded edge facing upward. This orientation is critical due to the manufacturing process of the stamped washers.
Safety Considerations When using compressed air for maintenance, never look directly into the assembly to prevent injury. Proper alignment of all components is essential for safe operation and to prevent unwanted noise during use.
Exploded views
Exploded view drawings can show you the relationship between different components and how they fit together. It helps understand the order of assembly of the different parts. Below you can see different exploded views for “Front suspension” zone.
Maintenance specifications
Component Requirements:
- 13mm wrench for assembly
- Compressed air for component removal
- Appropriate grease for moving parts
- Metal washer with specific orientation
- Spring divider for dual-spring system
Where you can order parts
You can order velomobile parts from dealers. Search your local or nearest dealer HERE.
Technical specifications and maintenance procedures are subject to updates. Always refer to the latest documentation for current information.
Need assistance? Contact us at sales@velomobileworld.com