Bülk Models Velomobiles
Bulk Steering
Here you can find technical support information for Bülk “Steering” parts. On this page you can see descriptions, exploded views, videos & more. If you have questions do not hesitate to contact us, we would like to help you.
Videos
In this section we will add videos that can help you fixing various malfunctions for “Steering” zone, maintenance videos or other kind of info that can make your velomobile experience great.
Steering Adjustment
Steering System Adjustment Guide
Proper steering adjustment is crucial for safe and comfortable operation. The adjustment process focuses on achieving the optimal balance between smooth movement and precise control.
Cardan Adjustment Principles
The steering cardan requires precise adjustment to prevent two common issues: excessive play that causes constant left-right movement, and over-tightening that prevents straight-line stability. The goal is to achieve smooth movement without play, where components move easily but maintain control.
Adjustment Process
The adjustment procedure requires careful attention to detail. Using a 10mm wrench and 5mm Allen key, the process involves adjusting two key points in the steering assembly. The system uses nuts with internal threads for counter-tightening, allowing precise adjustment of tension.
Fine-Tuning Guidelines
Proper adjustment should result in movement smooth enough that components can move under their own weight, yet without any detectable play. If perfect adjustment cannot be achieved, it’s better to allow minimal play rather than over-tightening, as this helps maintain straight-line stability.
Important Considerations
When adjusting steering components: The movement should be very light but controlled. Check for consistent smoothness throughout the range of motion. Verify the absence of play after tightening. Test the system through its full range of movement.
Exploded views
Exploded view drawings can show you the relationship between different components and how they fit together. It helps understand the order of assembly of the different parts. Below you can see different exploded views for “Steering” zone.
MAINTENANCE SPECIFICATIONS
Required Tools:
- 10mm wrench
- 5mm Allen key
- Adjustment verification tools
- Basic hand tools for assembly
WHERE YOU CAN ORDER PARTS
You can order velomobile parts from dealers. Search your local or nearest dealer HERE.